Internet Setup


Email Setup


Windows Vista - New Connection Wizard
  1. Open the New Connection Wizard

    To begin, click on Start Connect To.




  2. Set up a connection or network

    You should now be presented with the Connect to a Network window.

    Click on Set up a connection or network from the list of links at the bottom.




  3. Choose a connection option

    Select Set up a dial-up connection from the list of options.

    Click Next to proceed.




  4. Connection Information

    First, click on the phone number field and enter the full ten digit dial-up access number for the city you are currently local to.  These are listed in the table below.  Make sure you use the number that is local to you.

    Now enter your porchlight.ca username and password in the appropriate fields.

    Finally, enter porchlight.ca for the connection name and click Connect to continue.



    Calling AreaPhone Number
    Chatham5193880100
    Guelph5198380110
    Hamilton9054814299
    Kingston6138870104
    Kitchener5195798612
    London5194884244
    Oshawa9056740202
    St. Catharines9053780110
    Toronto4168480008
    Windsor5199680194


  5. Connect to the Internet

    The wizard will now attempt to connect to the Internet, with the intent of verifying the settings that you've supplied.  If your phone line is not available or you do not wish to connect at this time, click Skip.

    If you clicked the Skip button, proceed to step 6.  If you tested the connection and it was successful, you can jump to step 7.




  6. Set up the connection anyways

    If you clicked the Skip button in the previous step, the wizard will now state the connectivity test was unsuccessful.  This is expected.  Simply click on Set up the connection anyway to proceed.




  7. Finished

    Now click on Close to complete the setup procedure.



    To connect to the Internet, open the Connect to a Network window once more with Start Connect To.  There you will find the porchlight.ca connection just created.  Simply highlight it and click on Connect to launch the connection window.



    From here, verify your username and click Dial to access the Internet.